Start a new topic

Hot Box EXA fade time

When running in DMX mode(10 Channel) some of the lights, randomly do not run in 'mode 0' snap mode (the colors change and fade instantly).  It seems to a firmware problem.   Let's say the fixtures are off and I flash them white, most go out right away, but a few fade out.  I run a string of 24 fixtures and checked the mode,  A week later the same thing but different fixtures on the string are doing this.


Thanks

Frank 

1 Comment

I had this problem with one light.  No matter which mode it was in.  It was the first fixture in the chain.  If using Exlipse software, try releasing all fixtures, the try a new fade and I bet it will work.  There was something being held over from a previous scene and was stored in the new scene.  Something maybe to do with fade time.

 

Login or Signup to post a comment